Tuya Smart controller
Voice control/mobile APP remote control/touch remote control
Product parameters
Product Name: LED Controller
Operating voltage: DC 4.5V
Remote control mode: RF
Remote control distance: more than 20 meters
Battery type: 3 x 7 size (AAA) batteries
Transmitting frequency: 2.4G signal
Working voltage: 5-24V
Material: PVC
Output signal: 2.4G signal
Output current: 6A/channel
Maximum Output Current:
DIM:12V@216W 24V@432W
CCT:12V@216W 24V@432W
RGB:12V@216W 24V@432W
Operating voltage: DC 4.5V
Remote control mode: RF
Remote control distance: more than 20 meters
Battery type: 3 x 7 size (AAA) batteries
Transmitting frequency: 2.4G signal
Working voltage: 5-24V
Material: PVC
Output signal: 2.4G signal
Output current: 6A/channel
Maximum Output Current:
DIM:12V@216W 24V@432W
CCT:12V@216W 24V@432W
RGB:12V@216W 24V@432W
Product feature description
Connection instructions
1.Use your smartphone download the smart life APP:
2. After the installation is completed, click on the icon to enter the APP page.
3.Turn on the Bluetooth function of your phone and keep Bluetooth on (convenient for device pairing)
4. Connect the controller to the corresponding power supply and lamp (such as the connection diagram), turn on the power supply, and the device enters the pairing state.
5. When the controller is in pairing, the smartphone will automatically discover the product.
6. When adding a device, you need to enter the WIFI password of the smartphone connection (automatically identify the WiFi connected to the mobile phone)
7. Enter the correct password for about 10-20 seconds to complete the connection
Product dimensions
Safety and precautions
- Please debug and install this product by professionally qualified personnel.
- This product cannot be waterproof, need to avoid sun and rain, if installed outdoors, please use a waterproof box.
- Good heat dissipation conditions will prolong the service life of the LED controller, please install the product in a well-ventilated environment.
- Please do not install and use such products in lightning and thunder, strong magnetic fields or high voltage occasions.
- Please check whether the output voltage of the LED power supply used meets the requirements of the product voltage range.
- The diameter of the wires used must be large enough to load the connected LED luminaires, and ensure that the wiring is secure to avoid accidents caused by overheating or poor contact of the wires.
- Before power-on commissioning, make sure that all wiring is correct to avoid damage to the lamp due to miswiring.
